Vanair 125/185 Underdeck Air Compressor - 050002 Type: Vanair 125/160/185 UDSM PTO Driven air compressor, new and in current production.
Capacity: 90 to 200 CFM free air at 100 psig. Compressor to be capable of 90 to 200 PSIG operation
Compressor: Sullair 10 series Powertech design oil flooded rotary screw. The air compressors shall be completely
manufactured and assembled in the USA . Air compressor inlet control valve shall be an integral
design incorporated in the cast iron housing. No bolt on inlet control valves
Input Speed: Air compressor shall produce 125 CFM at 1330 RPM input speed 160 CFM at 1675 RPM input speed
185 CFM at 1920 RPM input speed
Ratings per CAGI/PNEUROP PN2CPTC3
Gear Ratio: Air Compressor gear ratio shall be 3.94:1 to ensure lowest possible engine speed
Air Intake Filters: Separate two-stage, heavy duty, dry-type air filters shall be provided for air compressor.
Air Receiver: The receiver shall be ASME code approved rated at a 225 psig working pressure. It shall be equipped with
an ASME air pressure relief valve located upstream of the final oil separator. The receiver shall be
equipped with a fill cap and easily readable sight glass, 3/4 inch service valve and a spin-on air
compressor oil filter with built in by-pass protection.
Air/Fluid Separator: Separator to be located internally in air receiver tank. Separator shall be constructed with a pleated
media, welded straps, scrim barrier, support screen, expanded metal outer wrap and internal and
external grounding. Vanair separator shall provide for enhanced air quality, reduced operating and
maintenance cost and optimized compressor performance. Separator to be warranted for 5-years or
Instrument Panel: Panel to include compressor air pressure gauge, hour meter, compressor oil temperature gauge and
over-temperature/over-pressure reset switch.
Protective Circuit: Compressor to automatically shutdown in case of high compressor temperature or over
pressurization. Additional protective features provided include automatic blow down valve, receiver
relief valve and minimum pressure valve.
Cooling System: Compressor cooling system shall allow rated air delivery and pressure operation continuously in 125
degree Fahrenheit ambient temperatures. Cooler to be mounted in a powder coated sheet metal
enclosure with a suction type fan assembly. (No ABS plastic shrouding) Compressor fluid shall be
filtered by a 25 micron full flow spin-on replaceable filter canister. A fan temperature switch shall be
provided to regulate compressor cooling.
Controls: Pneumatic inlet control valve shall be integrated into compressor system and automatically modulate output
from 0 to 100% in response to air demand
Speed Control: Electronically controlled engines speed control shall allow modulation of engine speed to match air demand.
Driveline: 2 1/2 inch 1310 series driveline with universal joint, yoke and companion flange